CLAS Certificate Number 2009-02

Polycontrols

3650-A1 blvd Matte
Brossard, Québec
Canada J4Y 2Z2

Contact

Sylvain Desaulniers
Telephone: 450-444-3600
Fax: 450-444-1088
Emailsylvain.desaulniers@polycontrols.com

Clients Served

  • All interested parties
  • Some calibration services are available on-site. These services are indicated in the "Remarks" column of the following pages.

Field(s) of Calibration

  • Mechanical

SCC Accreditation (ISO/IEC 17025)

  • Accredited Laboratory No. 655
  • First issued 2009-11-16
  • Issue 4.0e 2017-03-19

This scope of calibration capabilities is published by the CLAS program of the National Research Council of Canada (NRC) in close co-operation with the PALCAN program of the Standards Council of Canada (SCC), Canada's accreditation body for calibration and testing laboratories. The SCC accredits the capability of the named laboratory to perform the listed calibrations at the given Best Measurement Capability (see Supplementary note C and note D) with traceability to the International System of Units (SI) or to standards acceptable to the CLAS program.

Measured Quantity & Range or Instrument Calibration Measurement Capability
expressed as an Uncertainty (±)
(See supplementary notes)
Type of Service Remarks
Flow
Gas Flow
5 sccm to 10 slpm
0.2 % II Transfer standard, calibration in the Polycontrols Laboratory and On Site Calibration Services
10 slpm to 30 slpm
0.3 %
30 slpm to 3000 slpm
0.2 %
3000 slpm to 6000 slpm
0.3 %
0.5 sccm to 5 sccm
0.5 %
Liquid Flow
Mass flow (water)
0.378 kg/min to 1100 kg/min
0.02 % II Gravimetric method, calibration in the Polycontrols Laboratory
Volumetric flow (water)
0.378 l/min to 1100 l/min
0.021 % II Gravimetric method, calibration in the Polycontrols Laboratory
Mass flow (liquid)
0.45 kg/min to 800 kg/min
0.12 % II Reference meter, calibration in the Polycontrols Laboratory
0.45 kg/min to 227 kg/min
0.12 % On Site Calibration Service
Volumetric flow (liquid)
0.45 l/min to 800 l/min
0.13 % II Reference meter, calibration in the Polycontrols Laboratory
0.45 l/min to 227 l/min
0.13 % On Site Calibration Service
Mass
Density (water)
980 kg/m3 to 1020 kg/m3
0.05 kg/m3 II Comparison to flow calibration bench, calibration in the Polycontrols Laboratory
Density of liquids
500 kg/m3 to 1020 kg/m3
0.03 kg/m3 II Oscillating tube density meter, calibration in the Polycontrols Laboratory
Date modified: